一定牛彩票网

The special column of mining truck covers: information of various mining carts such as dump type mining cart, side dump type mining cart, mining material cart, mining flatbed cart, fixed cart box narrow-gauge mining cart and so on.

翻斗式矿车
recommend

Introduction of dump truck

The section of the dump car is V-shaped or U-shaped, and it is supported on the turning rail of the frame. The car is unloaded on the turning rail. Dump trucks are used on mines or construction sites to transport broken pieces of material. Such as: ore, coal, stone, etc. It is composed of carriage, frame, buffer bumper, axle, etc. Simple structure, sturdy and durable, easy to use, only need to manually open the stop plate to easily unload materials. The roller bearing adopts roller bearings, which effectively reduces the running resistance and can be pushed by human power.

Serial number model Volume
Loading
T
Dimensions Orbital moment Wheelbase Wheel diameter Traction height Tractive force
KN
Unloading angle
long width high
1 KFU0.75-6 0.75 1.88 1700 980 1250 600 600 300 320 60 40
2 KFU1.0-6 1.0 2 1910 1070 1320 600 600 300 320 60 40
Note 1: The height H and the traction height h are calculated from the rail surface.
Note 2: The loading capacity is calculated based on the material bulk density ρ = 900kg / m³, and the maximum loading capacity is calculated based on the material bulk density ρ = 900kg / m³.
Model and basic parameters of dumper type Coal dump (MA) certificate for dump truck Coal dump (MA) certificate for dump truck Dump Truck Product Photos Dump Truck Product Photos Dump Truck Product Photos
固定式矿车
sell like hot cakes
Serial number model Volume
Loading
T
Loading capacity T Dimensions Orbital moment Wheelbase Wheel diameter Traction height Tractive force
KN
long width high
1 MGC1.1-6
Stationary minecart
1.1 1 1.8 2000 880 1150 600 550 300 320 60
2 MGC1.7-6
Stationary minecart
1.7 1.5 2.7 2400 1050 1200 600 750 300 320 60
3 MGC1.7-9D
Stationary minecart
1.7 1.5 1.7 2100 1150 1300 900 600 350 320 60
4 MGC3.3-9
Stationary minecart
3.3 3 5.2 3450 1320 1300 900 1100 350 320 60
Note 1: The height H and the traction height h are calculated from the rail surface.
Note 2: The loading amount is calculated based on the loose and dense material³.

Brief introduction of stationary minecart

Fixed minecarts are used for transportation in large coal mines, small and medium inclined shafts, small inclined shafts, and ground transportation. MG1.1-6 minecart consists of carriage, frame, wheelset, and bumper. If a fixed minecart requires a coupling or a cart baffle, please specify it when ordering. Narrow-gauge railway transport vehicles that transport loose materials such as coal, ore, and waste rock in mines must generally be pulled by locomotives or winches.

Stationary Coal Mine Safety (MA) Certificate Type and basic parameters of stationary mine models Stationary mining cart product photo 1 Stationary mining cart product photo 2 Stationary mining cart product photo 3
侧卸式矿车
recommend

Introduction of Sideloading Miner

Side-loading type mining truck is an efficient and self-unloading operation equipment. It has no capacity and needs to be used with hauling locomotive. One or both sides of the carriage can be opened. The mine cart is tilted by the discharge track installed on the discharge point, and the side door is opened by the pull rod to discharge the mine.

Serial number model Volume
Loading
Kg
Orbital moment Dimensions Wheelbase Wheel diameter Traction height Tractive force
KN
Unloading angle
long width high
1 KC1.2-6 1.2 3000 600 2100 1050 1200 600 300 320 60 ≥40
2 KC1.6-6A 1.6 4000 600 2500 1200 1300 800 350 385 60 ≥40
3 KC2-6A 2 5000 600 3000 1250 1300 1000 400 360 60 ≥40
4 KC2.5-6 2.5 6250 600 3500 1250 1300 1100 400 385 60 ≥40
Note 1: The height H and the traction height h are calculated from the rail surface.
Note 2: The loading capacity is calculated according to the bulk density of the material ρ = 2500kg / m³.
Type and basic parameters of side dump type Side dump mine cart product picture 1 Side dump mine cart product picture 2 Side dump type mining cart product picture 3 Side dump type mining cart product picture 4
底卸式矿车
recommend

Introduction of bottom dump truck

The bottom dump type mine truck is suitable for underground or surface mining of metal mines or other mines with similar properties and mining methods.

model Volume
Loading
T
Loading capacity T Orbital moment
G
Dimensions Wheelbase
C
Wheel diameter
D
Traction height
h
Tractive force
KN
Unloading angle
long width high
MDC3.3-6 3.3 3 5.3 600 3450 1200 1400 1100 350 320 60 50
MDCC3.3-6 3.3 3 5.3 600 3680 1200 1400 1100 350 320 60 55
MDC5.5-9 5.5 5 8.8 900 4200 1520 1550 1350 400 430 60 50
MDCC5.5-6 5.5 5 8.8 600 5050 1360 1600 1600 400 430 60 55
Note 1: The height H and the traction height h are calculated from the rail surface.
Note 2: The loading capacity is calculated based on the material bulk density ρ = 900kg / m³, and the maximum loading capacity is calculated based on the material bulk density ρ = 1600kg / m³.
Note 3: Dimensions in parentheses are overlapped minecarts.
Bottom dump type mining cart product picture 1 Bottom dump type mining cart product picture 2 Type and basic parameters of bottom dump type
材料车
recommend

Material cart introduction

Suitable for underground mining, transportation of support materials and other materials along underground roadways and surface industrial sites. MLC5-6 material cart (referred to as material cart) is a vehicle for transporting pits, supports or other materials on the narrow-track railways of coal mine grounds and underground roadways.

model Loading
T
Tractive force
KN
Orbital moment Wheelbase Wheel diameter Traction height Dimensions
long width high
MLC2-6 2 60 600 550 300 320 2000 880 1150
MLC3-6 3 60 600 750 300 320 2400 1050 1200
MLC5-6 5 60 600 1100 350 320 3450 1200 1200
MLC5-9 5 60 900 1100 350 320 3450 1320 1300
MLC3-9A 3 60 900 600 350 320 2100 1150 1300
Note 1: The height H and traction height h are calculated from the rail surface.
Material Vehicle Coal Safety (MA) Certificate Material model and basic parameters Material cart product picture 1 Material cart product picture 2
平板车
recommend

Introduction of Flatbed

Flatbed truck is suitable for underground mining, transporting equipment or other items along underground roadways and surface industrial sites.

Introduction of mining flatbed

The mine flatbed truck uses a modified single-row radial ball bearing, which can still be used normally even in a very harsh environment, uneven roads and severe dust. The flatbed truck has extended him because of his modified single-row radial bearing Life. At the same time, because the load-bearing structure of the flatbed is reasonable and simple, and the cost is low, it is favored by various mines and construction projects.

Box-type unpowered traction flatbed

The new box-type unpowered flatbed is mainly welded by steel plate + section steel. It adopts 8 sets of bearings, all built inside the box structure, which can effectively avoid dust erosion and prolong the service life. The principle is combined with the standard design of the flat box-type unpowered flatbed vehicle, which is convenient for maintenance, easy to disassemble, strong carrying capacity, long service life, and small table deformation.

Serial number model Loading
Kg
Dimensions Orbital moment Wheelbase Wheel diameter Traction height Tractive force
KN
Minimum plane running radius
long width high
1 MPC2-6 2000 2000 880 410 600 550 300 320 60 9
2 MPC3-6 3000 2400 1050 415 600 750 300 320 60 9
3 MPC5-6 5000 3450 1200 480 600 1100 350 320 60 12
4 MPC5-9 5000 3450 1320 480 900 1100 350 320 60 12
5 MPC10-6 10000 3460 1300 304 600 1100 250 230 60 12
6 MPC10-9 10000 3460 1300 304 900 1100 250 230 60 12
7 MPC13-6 13000 3350 1400 342 600 1000 300 270 60 12
8 MPC15-6 15000 3460 1300 357 600 1100 300 320 90 12
9 MPC15-9 15000 3460 1300 357 900 1100 300 320 90 12
10 MPC18-6 18000 3350 1400 346 600 1000 300 270 60 12
11 MPC20-6 20000 3460 1300 346 600 1100 300 320 120 12
12 MPC20-9 20000 3460 1300 364 900 1100 300 320 120 12
13 MPC25-6 25000 3460 1300 390 600 1600 350 320 140 15
14 MPC25-9 25000 3460 1300 390 600 1600 350 320 140 15
15 MPC26-6 26000 2400 1460 390 600 1100 240 280 60 12
16 MPC30-6 30000 3460 1300 400 600 1600 350 320 170 15
16 MPC30-9 30000 3460 1300 400 600 1600 350 320 170 15
Note 1: The height H and the traction height h are calculated from the rail surface.

Other topics

  • Heading Machine Topic

  • Special topic

  • Dumper topic

  • Lifting equipment topic

  • Railway Equipment Topics

  • Hydraulic support topic

  • Shearer topic

  • Minecart topic

  • Support Equipment Topics

  • Special Topics for Rock Drilling Equipment

  • Emulsion Pumping Station

  • Special spray equipment

  • Drainage equipment topic

  • Topics on mining doors

  • Survival cabin topic

  • Security rescue equipment topic

  • Electrical equipment topic

  • Special Topics on Steel Equipment

navigation

online service
Enterprise QQ
hotline
Mobile access
Mobile access

Quick navigation

var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?be055eb5acfdc25d3bd72279b8418725"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();